Skip to content
Boilers on Demand logoBoilerson Demand

ServicesCombustion & Burner Service

Combustion and Burner Service in Houston, TX

Burner tuning, combustion analysis and fuel train service, the fastest route to lower fuel spend and stable firing.

Technician tuning a red gas burner with a handheld combustion analyzer

Combustion · Houston region

NB R-stamp repairs · 24/7

Why it matters

Combustion is where efficiency is won or lost. We analyse flue gas, adjust the air-fuel ratio through the firing range and correct the fuel train and linkage that caused the drift.

What you get

Stable, clean firing across the full load range.

Combustion Analysis and Tuning

Combustion efficiency is the single biggest driver of operating cost in a boiler system. An improperly tuned burner wastes fuel, increases emissions, and stresses heat transfer surfaces. Boilers on Demand performs combustion analysis using calibrated flue gas instrumentation to measure oxygen, carbon dioxide, carbon monoxide, and stack temperature. We use those readings to tune the burner for maximum efficiency.

The result is measurable fuel savings, reduced stack emissions, and improved boiler performance.

Burner Repair and Replacement

When a burner component fails, reliable ignition and stable flame quality are compromised. Boilers on Demand repairs and replaces burner components including ignition systems, flame safeguards, gas trains, fuel valves, blower motors, and nozzle assemblies. We also perform complete burner replacements when the existing unit is beyond practical repair or when an upgrade improves fuel efficiency.

If the burner issue points to a need for full boiler repair if the issue extends beyond the burner, we handle both in a single mobilization.

Emissions Compliance

Industrial facilities in the Houston area operate under Texas Commission on Environmental Quality (TCEQ) regulations regarding combustion emissions. Properly tuned burners produce less CO, NOx, and particulate matter, helping facilities stay in compliance. Boilers on Demand's combustion service supports your emissions compliance program and can document combustion performance for regulatory reporting purposes.

For facilities where combustion improvements as part of a full reconditioning make sense, we integrate burner service into the full scope.

The burner is the heart of a boiler system. If it is not firing cleanly and efficiently, nothing else about the boiler can compensate. A dirty, worn, or misadjusted burner costs money every time the boiler fires, drives up emissions, and shortens the life of downstream components including tubes and refractory.

Boilers on Demand provides complete combustion and burner services for commercial and industrial boilers across the Houston area. We service natural gas, diesel, and combination fuel burner systems on firetube and watertube boilers. Our technicians are experienced with all major commercial and industrial burner makes and models.

Annual combustion service is the most cost-effective preventive maintenance step most boiler owners can take. A tune-up that improves efficiency by even a few percentage points pays back its cost quickly in fuel savings, particularly for facilities running boilers at high duty cycles.

Industries we serve for combustion and burner work include petrochemical and refinery facilities, hospitals and healthcare campuses, food processing plants, manufacturing operations, and commercial buildings.

Contact us to schedule combustion service. We operate 24/7 for emergency burner failures.

Questions

Combustion & Burner Service FAQ

A combustion analysis measures flue gas composition to determine how efficiently the boiler is burning fuel. We test for oxygen, carbon dioxide, carbon monoxide, and stack temperature, then calculate combustion efficiency and identify tuning opportunities. The results guide burner adjustments that reduce fuel waste and emissions while improving boiler performance.

Even a modest efficiency improvement of 2 to 5 percent represents significant savings for facilities with continuous boiler operation. The return on a professional combustion service often pays back the service cost within weeks for high-usage industrial operations. The exact savings depend on your fuel costs, boiler load, and how far out of tune the system was operating.

Yes. Boilers on Demand services natural gas, diesel, and combination burner systems across firetube and watertube boiler applications, covering all major commercial and industrial makes and models.

Most commercial and industrial boiler burners should receive a combustion analysis and tuning at least annually, typically before peak heating season. High-duty-cycle industrial systems may benefit from more frequent service. Regular burner service prevents efficiency drift, reduces emissions, extends burner component life, and keeps the system running reliably.

Common warning signs include increased fuel consumption without a change in load, visible smoke or soot from the stack, flame instability or burner lockouts, unusual noise during firing, difficulty reaching set point, and failed emissions tests. Call 936-300-4111 if you observe any of these symptoms.

Scope of work

Everything included, line by line.

  1. 01Flue gas analysis and combustion tuning
  2. 02Burner overhaul and nozzle service
  3. 03Fuel train inspection and repair
  4. 04Flame safeguard and ignition troubleshooting
  5. 05Linkage, damper and actuator adjustment
  6. 06Before-and-after readings recorded

Request this service

Tell us the unit and the symptom.

Include the boiler type and what it's doing. If it's down right now, call instead, the phone is the fastest route to a technician.

Down right now? Call 936-300-4111

Next step

Boiler down, or planning ahead?

Call for 24/7 emergency dispatch, or send the details and we will come back with a written quote.

Call nowGet a quote